Assembly; First Use - ElectrIQ E-SC1-V2 User Manual

ASSEMBLY

To assemble the handlebar, it must first be fitted into the top of the handlebar stem. Slide the
silver base of the handlebars into the stem and align the 4 holes (2 on either side). Then insert
the 4 bolts provided loosely into the holes. Once all 4 are in position tighten them to fix the
handlebar into place, taking care not to damage any of the interior wiring.

FIRST USE

IMPORTANT
: Before using the scooter for the first time, fully charge the battery. After turning
on the scooter, check the battery power on the display and verify that all lights are working.
• Remove the protective cover from the charging port on the scooter.
• Ensure that the charging port is dry and not damaged before inserting the charger into the
port. (Refer to the scooter diagram for location).
• When the indicator on the charger is red, the scooter is charging.
• The indicator light on the charger will turn green when the battery is fully charged. This
usually takes 5-6 hours.
• Do not over charge as long-term battery life may be affected. Do not leave unattended while
charging.
• When charging has completed, remove the charger and ensure that the protective cover is
placed securely over the charging port.
5