Display - ElectrIQ E-SC1-V2 User Manual

DISPLAY

• The LED display on the handlebar will turn on after powering up the scooter.
• The scooters battery level is displayed at the bottom of the display. During use, the number of
bars on the battery level indicator will decrease.
• When the battery level reduces, the bars will disappear until the battery is empty. The battery
warning indicator will illuminate when the battery is at critical level.
• When the battery warning light is blinking, you must slow down and find a power source
immediately, as continued use may risk damaging the battery.
When the scooter is turned on it will be set at speed level 1, this is the lowest speed and highly
recommended for beginners and inexperienced users.
To change between the three power levels, press the power button. After speed 3 has been
reached, if the power button is pressed again it will cycle back to speed 1.
Quickly press the power button twice to turn the front/rear lights on or off.
The speed is shown in km/h on the top of the display.
8