Maintenance; Storage; Technical Specifications - ElectrIQ E-SC02PRO User Manual

MAINTENANCE

The scooter requires routine cleaning and maintenance.
Before any work is carried out on the scooter, ensure that the charging cable is not connected
•
and that the scooter is powered off.
To clean the scooter, wipe the exterior with a soft damp cloth, then dry immediately.
•
The exterior of the scooter is dustproof and splash proof with a water ingress rating of IPX4.
•
Do not allow water to get inside of the scooter. There is a high risk of the internal electronics
•
becoming permanently damaged.
The tyres on the scooter must be regularly checked for deflation and damage. If the tyres are
•
deflated, pump them up to the recommended tyre pressure 2.0 bar.

STORAGE

Ensure that your scooter is only charged to 40 – 50 percent power before storage. If you plan
•
on storing the scooter for a long time. Make sure to half charge the scooter every 2 months to
avoid battery issues.
Do not store the scooter at less than 7⁰C or above 25⁰C
•
Keep the scooter inside its own packaging, or cover it to prevent dust build up.
•
Keep the scooter indoors at all times when not in use.
•

TECHNICAL SPECIFICATIONS

Model name
Maximum loading
Maximum speed
Maximum Range
Motor power
Climbing gradient
Power supply
Battery
Battery power
Battery voltage
Battery capacity
Charging temperature
Charging time
Storage humidity
Body dimensions
Folded body dimensions
Net weight
Tyre Size
AC 110-240V, 50/60Hz
15000 mAh Lithium battery
110 x 42 x 115 cm
110 x 42 x 52 cm
9
E-SC02PRO
120 kg
25 Km/h
45 km
350W
11⁰
540 Wh
36V
15 Ah
0⁰C - 40⁰C
7-8 hours
5% - 95%
17.85kgs
10 inches