Table of Contents
Advertisement
ASSEMBLY
Ensure that the mini scooter is fully assembled before operating.
Once the catch is located, ensure that the nut on the
folding buckle is suitably tightened before using the
folding buckle to lock the front of the scooter in position.
Place the handlebar in the groove on top the handlebar stem.
Align the holes on the handlebar with the stem before inserting
the handlebar bolts. Secure the bolts using the provided nuts.
Slide the Handlebar stem into position at the front of the
scooter. Then use a screwdriver to tighten the bolts on
the stem clamp to lock the handlebar stem onto the
scooter.
6
Ensure the folding buckle is
unfastened then lift the locking
catch up to release it from the
folding block. Twist the front of
the scooter into position until a
click is heard and the catch is
located in the upright position on
the folding block.
Advertisement
Table of Contents
