Advertisement
8
.BUS Control Adjustment
To enter factory menu you can follow the steps:
1. Press V- to minish the voice value to 0.
2. Press "menu" on the TVset,you will see the list on the screen.
3.Press "menu"on the remote control, the list on the screen will disappear.
three seconds,then you will enter the factory menu
4.Press" V-
"
FactoryMenu
WhiteBalance
ColorTemp
Note： You can press V+/V- to adjust white banlance and colortemperature
SetUp
voltage level
Note : The
parameters in this item are default value in system.
BlackBalance R
CR
BlackBalance G
CG
BlackBalance B
CB
WhiteBalance R
WDR
WhiteBalance G
WDG
WhiteBalance B
WDB
Warm Offset (work on the range of adjusting CR：CR≤255-Warm)
Green Offset (work on the range of adjusting CR：CR≤255-Warm)
Cold Offset (work on the range of adjusting CR：CR≤255-Warm)
Panel
Type1/Type2 The style of the panel
TunerPara
The value of VL{0-ffff} def 2288H
VL
The value of VL{0-ffff} def 0C80H
VH
The value of VL{0-ffff} def 2288H
UVH
Device
Eeprom debug the parameter of the Eeprom
debug the parameter of the Svp
Svp
debug the parameter of the 7117
7117
debug the parameter of the 3788
3288
Msp3450 debug the parameter of the Msp3450
PinDect
SVideoDect Low/High Svideo check the low voltage level and the high voltage level
PhoneDect Low/High earphone check the low voltage level and the high
Feature
TimeJump On/Off
value{0-255} def 0
value{0-255} def 0
value{0-255} def 0
value{0-255} def 141
value{0-255} def 141
value{0-255} def 161
Advertisement
