Download Print this page

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

Read all of the instructions before using this appliance. When using this
appliance, always exercise basic safety precautions, including the following:
1)Save these Instructions ---the safety and operating instructions should be
retained for future reference.
2)All warning on the appliance and in the operating instructions should be followed.
3)Cleaning --- Unplug from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use only dry cloth for cleaning.
4)Attachments ---do not use attachments not recommended by the manufacturer
as they may cause hazards.
5)Water and moisture -- do not place this product near water, for example, near a
bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a
swimming pool.
6)Accessories ---do not place this unit on an unstable cart, stand, tripod, bracket,
or table. Use only with a cart, stand, tripod, bracket, or table recommend by the
manufacture, or sold with the unit.
7)Ventilation ---Slots and openings in the cabinets and the back or bottom are
provided for ventilation. These openings must not be blocked. In a built in
installation such a bookcase or rack do not install product unless proper ventilation
is provided.
8)Power Source ---this TV should be operated only from the type of power source
indicated on the rating label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet. To prevent electric shock, ensure
the grounding pin on the AC cord power plug is securely connected.
10)Power cord protection ---Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords or plugs, convenience receptacle, and the point where
they exit from the appliance.
11)Lighting precaution ---for added protection for this product during a lighting
storm or when it is left unattended for long period of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent damage to the
product due to lighting and power line surges.
12)Never push objects of any kind into this product through openings as they may
touch dangerous voltage point or short out parts that could result in a fire or electric
shock. Avoid spilling liquid of any kind on the product.
13)Servicing ---do not attempt to service the product by yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to authorized service personnel.
14)Unplug this unit from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
Owner s Manual 3

Advertisement

   Related Manuals for Haier HLH26BBTV

   Summary of Contents for Haier HLH26BBTV

  • Page 1: Important Safety Instructions

    8)Power Source ---this TV should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

  • Page 2

    b.If liquid has been spilled, or objects have been fallen into the unit. c.If the unit has been exposed to rain or water. d.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

  • Page 3

    Down/Up. Sel ct desired option on MENU or tune to the desired channel. VOLUME Buttons MENU Button MENU INPUT MENU TV/AV POWER Power On/Off Button Power Standby Indicator illuminates red in standby mode,illuminates blue when the display is turned on...

  • Page 4

    Power Cord Socket This TV receiver operates on AC power. The voltage is indicated on the specifications page. Never attempt to operate the TV on DC power DVI Input/Audio input connect your cable/PC through the input...

  • Page 5: Function Introduction

    When using the remote control. Aim it towards the remote sensor on the TV. Function introduction Freezes the currently-viewed picture. Press this key to set sleeptimer. Select PC source Auto adjust for PC FAVORITE no available MTS/SAP no available Brings up the main menu to the screen or exit.

  • Page 6

    VIDEO INPUT POWER AUTO MUTE DISPLAY MENU EXIT ENTER P.STD VOL+ LOCK CALENDAR VOL- S.STD SAVING SURROUND SLEEP FREEZE RATING...

  • Page 7

    Press the switch button on the TV to turn the TV on. . If the TV was turned off with the remote control and then the ON/OFF switch on the back of the TV. Press the switch button on the back of TV and then press the POWER button on the remote control to turn the TV on.

  • Page 8: Basic Function

    Basic Function Basic Function Operation Menu 1.Press MENU button to open the main menu. Press VOL+/- button to select PIC., SOU., ADJ., SYS. , FUN. or TIME menu. 2.Press CH+/- button to select submenu, and press VOL+/- button to increase/decrease the value or select the setup. 3.Press MENU to return to the main menu.

  • Page 9: System Menu

    System Menu This TV set has three methods to set channels, which are respectively Automatic search, manual search In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel.

  • Page 10: Color System

    4. press VOL-/+ button to set Skip as On. 5. When you are satisfied with your choice, press MENU button to return to the previous menu or press EXIT button to return to TV viewing. If you want to recover the skipped channel 1.

  • Page 11

    Picture Quality Adjust Picture Quality Adjust The TV menu gives you an overview of MENU you can select. Note: Depending on the input signal, one or more menu items may not be selectable. Press MENU and then use VOL+/- button to select the PIC. Menu.

  • Page 12

    Note: 1. Select Balance to balance right and left sound channels of the TV. The intermediate value is 0. When indication value of Balance increases toward+50, sound of the right and left speaker becomes stronger and weaker, respectively. When indication value of Balance decreases toward -50, sound of the right and left speaker becomes weaker and stronger.

  • Page 13

    Adjustment Setup Adjustment Setup Adjustment Setup In VGA and DVI input mode , H Position and V Position can be used to adjust the picture position. When VGA DVI input mode is set 1. Press MENU button on the remote controller and then use the VOL+/- to select the ADJ.menu.

  • Page 14

    Repeat step 3 and 4 to select On/Off. If On is selected, and there is no signal to the TV for 2 minutes , be on the screen and for 3 minutes the TV will be in standby condition . If Off is selected , and there is no signal to the TV for 3 minutes without any operation , screen protection will be on the screen .

  • Page 15

    V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.

  • Page 16

    If some option is locked, the options of the same level will also be locked and the screen displays Lock . TV Rating Limit and Movie Rating Limit can only be opted when Parental Control is set to Custom. (Parental is only available in AV and S-Video signal)

  • Page 17

    Off/On Time Using on/off time function, the TV set can automatically turn on to a preset program or shut down in a preset Press CH+/- buttons to select "On Time", press VOL+/-buttons to select hour or minute position; then press the digital buttons to set the value of hours or minutes.

  • Page 18: Lock Menu Options

    Lock Menu Options Lock Menu Options - The TV has the function of security default lock. Password needs to be entered when the program lock mode is to be set. Lock Setup Press LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the Lock set menu will be menu willl be entered.

  • Page 19

    Press CH+/- button to select Child Lock. Press VOL+/- button to set On or Off mode. If lock on mode is set, Child Lock is inactivated automatically. In such case, If buttons on TV are pressed, the screen will display Child Lock, which can be erased by press of EXIT button.

  • Page 20

    - RGB (PC) mode only; This function doesn`t work for RGB-DTV mode. - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. - The Auto sync are not active in DVI mode.

  • Page 21

    Please be sure not to use a wet cloth. If you expect to leave your TV dormant for a long time (such as a vacation), it`s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

Comments to this Manuals

Symbols: 0
Latest comments: