Warning RISK ELECTRIC SHOOK WARNING : To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel. Safety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire.
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference. 2)All warning on the appliance and in the operating instructions should be followed.
SAVE THESE INSTRUCTIONS Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit.
To users: Thank you for purchasing Before connecting the LCD-TV and turning on the power, please read this book carefully. Please keep this book for later use. If the unit is disabled by an electrostatic discharge, please turn the power to the unit and turn it back on to reset. CONTENT Front Panel Controls...
Front Panel Controls TV/AV MENU 15HL25S/20AL25S Control Panel Function 1.TV/AV Selects the input signals: 2. MENU Press to select the main menu 3. VOL-(V-) Volume down / Left orientation to adjust the item in the OSD VOL+ (V+) Volume up / Right orientation to adjust the item/Press to enter 4.
Connection Options HLH15BB/15HL25S/HLE20BB/20AL25S (The figure is just for reference, please see actual unit. ) DC Power Cord Socket This TV operates on DC power. The voltage is indicated on the specifications page. Never attempt to operate the TV on ac power...
Connection Options HLH19BB/HLH19W The figure is just for reference, please see the real. And the AC power supply switch is on the back of the set) Antenna Input Connect cable or antenna signals to the TV, either direc- tly or through your cable box.
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV Illustration of the keys on the remote control: MUTE 1. MUTE Power supply switch Quick TV channel switch(return to the last channel) 3.
Remote Control Installing Batteries 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two alkaline respective mark) 3.Replace the cover of the battery compartment. Precautions Make sure that there is no obstacle between the remote controller and television set.
Connection Instructions The connection instructions shown here are for model HLH15BB for reference only. May differ with the other models mentioned. Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Connection Instructions PC Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off;...
Connection Instructions VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off;...
Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s).
Basic Operating Instructions Turn on the LCD-TV When the POWER MUTE is turned on, the indicator light on the front of the LCD-TV RECALL DISPLAY EXIT changes from red to green. When the LCD-TV is turned off using the power button, the LCD-TV will go into standby mode and the indicator light turns red.
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to remote control or on the panel to make a selection. Picture Mode Press P.STD button on the remote control for menu display .
Menu Operations * In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to Press TV/AV to select the input source, and the menu different . 1. Press MENU button to display the main menu, and VOL+/VOL-to select the main menu .
Menu Operations Picture Menu Options continued 2. Press CH+/CH- button to enter the picture menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4.
Menu Operations Sound Menu Options continued You can adjust sound options to the levels you prefer. 2. Press CH+/CH- button to enter the audio menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference .
Menu Operations Function Menu Options Menu Language Selection The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU button and VOL+/VOL- until the following menu appears on the screen. 2. Press CH+/CH- button to enter the function menu and to go up and down to select the desired option .
Menu Operations Function Menu Options Continued Note: Select CC1 for full translation of the primary language such as English in your area. Select CC2 for secondary language translation such as French or any other language that may be broadcast in your area. 4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF.
Menu Operations Tuning Menu Options 1. Press MENU and VOL+/VOL- button until the following menu appears on the screen Note: This menu is only appears in TV mode . 2. Press CH+/CH- button to enter the turning menu and to go up and down to select the desired option .
Menu Operations Tuning Menu Options Continued 4. FINE TUNE : If the image and / or sound received is not very good , you can press CH+/CH- to select FINE TUNE in the menu . Then , press VOL+/VOL- button to adjust and improve the image quality. Do not use this feature unless reception is poor.
Menu Operations Parental Menu Options Continued This function enables you to block certain TV channels in accordance to the requirements established by the FCC. 2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to select the desired option .
Menu Operations Parental Menu Options Continued PARENTAL LOCK TECHNOLOGY: The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV PROGRAMS Guide ratings to block certain types of TV programs and movies. To clearly understand TV program rating codes, read the following U.S.
Menu Operations Parental Menu Options Continued To understand clearly about movie rating codes, read the following list: U.S. Movie Rating Chart This means movie is not rated yet. It is pending government rating approval. General Audience-this type of movie rating means all ages admitted to see the movie.
Troubleshooting Guide To assist in location possible faults use help guide below Troubleshooting No picture, no sound Blank screen No sound Poor sound No picture in some channel No color for some channel program (black and white) Spots with some or all pictures Abnormal functioning Note:...
Temperature Accessories NOTE Design and specifications are subject to change without notice. Dimensions quoted in this manual are approximate. HLH15BB/15HL25S NTSC-M 1.5W+1.5W AV input PC input S-VIDEO input PC audio input Headphone output YPbPr input Antenna input DC input Input: 110V...