Getdatafieldcount; Gethashcode; Getdeviceconfig - Magtek aDynamo Manual

3 - MTSCRA Class Methods
This is a string value which indicates the type of encoding that was found on the card. The following
table defines the possible values.
Value Encode Type
00 ISO/ABA
01 AAMVA
02 Reserved
03 Blank
04 Other
05 Undetermined
06 None

3.41 getDataFieldCount

Retrieves data field count.
public int getDataFieldCount()
Parameters: None
Return Value:
Data field count

3.42 getHashCode

Retrieves SHA-x hash code.
public string getHashCode()
Parameters: None
Return Value:
String representing SHA-x hash code

3.43 getDeviceConfig

Retrieves device configuration.
public string getDeviceConfig(string configType)
aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, BulleT, mDynamo| Secure Card Reader Authenticator | .NET/PCL Programmer's
Reference (Windows/Windows Phone)
Page 26
ISO/ABA encode format. At least one track in ISO/ABA format, Track 3
not AAMVA format.
AAMVA encode Track 3 is AAMVA format, Tracks 1 and 2 are
ISO/ABA if correctly decoded.
The card is blank. Only occurs if all tracks decode without error and
without data.
The card has a non-standard encode format. For example, ISO/ABA
track 1 format on track 2.
The card encode type could not be determined because no tracks could be
decoded. (Combination of Error tracks and Blank Tracks, at least one
Error track).
No decode has occurred. This type occurs if no magnetic stripe data has
been acquired since the data has been cleared or since the reader was
powered on. This reader only sends an Input report when a card has been
swiped so this value will never occur.
Description