2/1 channel GTR amp
220 Watts x 2 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm, 14.4V)
Maximum power output of 440 Watts per channel at 4 Ohm.
270 Watts x 2 RMS (20Hz-20kHz, <1%THD+N, at 2 Ohm, 14.4V)
Maximum power output of 650 Watts per channel at 2 Ohm.
540 Watts x 1 RMS (20Hz-20kHz, <1%THD+N, at 4 Ohm mono, 14.4V)
This unit can be used as a bridging amplifier with a maximum
output of 1400 Watts at 4 Ohms.
Direct connection (High Level Input) can be made with the speaker
output of your car audio unit if it is not equipped with RCA line output.
Hi-Level Sensing power On feature allows the unit to be activated
without need for remote connection.
Built in variable 12 dB/Oct LPF (Low Pass Filter) from 50-300Hz
enables users to concentrate the power on lower frequencies.
Built in variable 12 dB/Oct Subsonic filter from 6-70Hz enables users
to create a band pass filter and block extremely low frequencies to
improve the subwoofer systems efficiency.
Variable 0-10 dB 40Hz bass boost provides additional bass
response at lower frequencies.