Sharp Sound Partner User Manual page 26

Maintenance (continue)
1 Remove screw with a
1
screwdriver.
Pull out the Power Circuit
2
Board (PCB) in the direction of
the arrow.
(refer 'Right and Left Main Part)
Battery will be followed
3
with PCB.
Cut 2 wires with a scissors.
4
(Do not cut both wires at the
same time due to the potential
of shorting out the battery.)
Take the battery out.
5
NOTE
Used batteries should be handled
in accordance with local laws and
regulations.
I Cleaning the unit
Periodically wipe the unit with a soft damped cloth, then with a dry cloth.
Caution:
 Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage
the unit.
 Do not apply oil to the inside of the unit. It may cause malfunctions.
Right Main Part
EN-24
2
PCB
1
Screw
Battery
3
Battery
4
Wires
5
Battery