um CHILL 125 cc. Service Manual page 22

Continued
Fault system
Wheel system The rear wheel swings.
The shock absorber is too
Suspension system
The braking performance is
Braking system
Lighting system The head Light is not on.
CHILL 125 cc. SERVICE MANUAL AND EFI DIAGNOSTIC
Fault
The rear aluminum wheel deforms.
The tire pressure is too low.
The rear wheel shaft is loose.
The spring of the shock absorber loses elasticity.
soft.
The shock absorber is improperly adjusted.
The brake malfunctions.
The brake shoe wears out.
poor. The brake disc wears out.
The head light bulb burns out .
The housing assembly switch is faulty.
The connecting plug is loose.
The fuse burns out.
The battery is faulty.
The lighting coil of the magnetor is faulty.
Causes
Replace the rear aluminum wheel.
Increase the tire pressure.
Tighten the nut of the rear wheel shaft.
Replace the spring of the shock absorber
Re-adjust the shock absorber
Adjust and repair the braking system
Replace the brake shoe
Replace the brake disc.
Add brake oil.
Replace the head light bulb.
Repair the housing assembly switch.
Tighten the connecting plug.
Replace the fuse.
Replace the battery
Replace the lighting coil.
Troubleshooting
22