Cornelius ED250 PRO GATE Maintenance Instructions

Cleanliness/Facility and Equipment Maintenance
ED250 PRO GATE - Cleaning Procedures
Supplies Equipment Needed
• Two-compartment Pail
• Two Clean Sponges or towels
Products Needed
Damon
D.C. Cleaner
Ster-O-Kem
WARNING: DISCONNECT POWER BEFORE CLEANING! DO NOT USE METAL SCRAPERS,
SHARP OBJECTS OR ABRASIVES ON THE ICE STORAGE HOPPER, TOP COVER,
AND THE AGITATOR DISK, AS DAMAGE MAY RESULT. DO NOT USE SOLVENTS
OR OTHER CLEANING AGENTS, AS THEY MAY ATTACK THE PLASTIC METAL.
Daily CLEAN EXTERIOR SURFACES
Step
1. Remove the cup rest from the drip tray and remove any foreign material.
2. Wash the drip tray with cleaning solution. Rinse drip tray with clean water and allow the solu-
tion to run down the drain.
3. Check the drip tray for proper drainage.
4. Wash the cup rest with cleaning solution and rinse in clean water. Install the cup rest in the
drip tray.
5. Clean all exterior surfaces of the Unit with the cleaning solution, then rinse with clean water
and dry with paper towels or clean cloths.
Daily CLEAN AND SANITIZE BEVERAGE DIFFUSER
Step
1. Remove the nozzle from the dispenser by turning and pulling down.
2. Remove the diffuser from the valve by pulling down. Place the nozzle and diffuser in the San-
itizer Solution.
3. Wipe inside the diffuser area using a sanitized cloth and the nylon nozzle brush.
4. Clean the diffuser and nozzle using the nylon nozzle brush. Rinse with lukewarm water.
5. Reinstall the diffuser and nozzle. Ensure they are located correctly in the machine.
Publication Number: TP01054PMC
Copyright © 2003
Procter & Gamble
Professional Strength Dawn
Clean Quick Liquid Quaternary Sanitizer
Action
Action
- 1 -
®
Rev. 02/03
www.cornelius.com