Cornelius ice maker service technical service (17 pages)
Summary of Contents for Cornelius ED300
Page 1
INSTALLATION INSTRUCTIONS ED300 Lid Kits for Ice Makers Publication Number: 629087943TEINS Revision Date: August 22, 2016 Revision: A Visit the Cornelius web site at www.cornelius.com for all your Literature needs.
Commercial Warranty. Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resulting from any of the following occurrences, including but not limited to, (1) other than normal and proper use and normal...
DF/ED300 Lid Kit Installation Instructions SAFETY INSTRUCTIONS AFETY WARNING: Before starting installation, read and understand all safety label and warnings on the machine. Also review and understand all safety instructions in the owners, installation and service manuals. Failure to comply could result in serious injury, death or damage to the equipment.
Failure to comply could result in serious injury, death or damage to the equipment. IMPORTANT: For DF/ED300 models, adjust the automatic agitation timer located in the dispenser’s electrical control box to 5 seconds on, 20 minutes off. Access to the timer is provided by removing the merchandiser/upper front panel.
Page 5
DF/ED300 Lid Kit Installation Instructions B. Position the ice maker base on the gasket located on the lid assembly. IMPORTANT: DO NOT slide the ice maker into position on the lid. C. Lift and set the ice maker base onto the lid to avoid damaging the gasket seal.