Westfalia NST-S-16 Instruction Manual page 6

1. Slide the variable element (5) into the main element (1).
2. Connect both elements with the provided safety chain (3). By
doing this, the elements cannot be pushed too far.
3. Insert both feet (6) into place. Make sure the locking pins are
in the desired height and are correctly engaged. Secure each
locking pin with the suitable safety split-pin (7).
4. If you do not use the adjustable trestle, remove the feet, turn
to 90° and re-insert the feet into place. In this position the feet
have to be inserted as far as they will go in order to be able to
fix the locking pins. By doing this, you can store the adjustable
trestle space savingly by hanging on the wall.
Assembling
V