Bauer Magnum SM 540 Operating Manual page 2

INTRODUCTION
Thank you very much for purchasing a BAUER gear pump!
We are pleased to offer you a BAUER gear pump featuring state-of-art technology and top quality. This
manual describes how to operate and maintain the BAUER gear pump. For reasons of clearness and due to
the many possibilities this manual does not contain everything down into detail. In particular, it cannot possibly
take into consideration every conceivable aspect of operation and maintenance.
If you need further information or if you should be faced with any particular problems for which this manual does
not offer sufficient details please feel free to contact BAUER company at Kowaldstraße 2, A-8570 Voitsberg for
the information you need.
Please note that the content of this operating manual neither constitutes part of nor does it alter any previous or
existing agreement, promise or legal relationship. Any commitment on the part of BAUER is a result only of the
individual purchase contract that also contains the complete and only valid warranty arrangement. Said
contractual terms of warranty are neither extended nor limited by the content of the present operating manual.
All information contained in the present manual is based on the latest product details available at the time of
printing.
BAUER reserves the right to change without prior notice, without assuming any liability!
BAUER gear pumps are designed for safe and reliable operation provided they are operated in compliance with
the present instruction manual. In spite of the simplicity of the pump we therefore request that you read this
manual carefully before putting your BAUER gear pump into operation! All instructions given for handling,
operating and servicing the pump must be strictly observed. Provided these instructions are followed the pump
will operate trouble-free to your full satisfaction for many years!
Non-observance of our instructions may result in injury or equipment damage!
This operating manual should be considered an integral part of the gear pump. Suppliers of new and used
pumps are advised to put down in writing that this manual was handed over together with the pump.
Please make this manual available to your operating personnel. You are kindly requested to state the pump type
and serial number of the gear pump in all inquiries, correspondence, warranty problems or parts orders. These
details are specified on the nameplate.
We hope you will enjoy working with your BAUER gear pump!
II
Operating manual for BAUER gear pump