- 1 Drive base pegs into the ground and
1
insert the center pole.
A : Make a rectangle by driving four Y-Pegs through gray ropes in
the corners attached to the gray building tape (webbing).
*Due to manufacturing, the position between the main unit and the
building tape (webbing) may not match the figure. In that case, set up
the position of the main body according to the building tape (webbing).
A
A
Check!
Buckle
(one place)
Gray building
tape (webbing)
12
Gray rope
Drive pegs at 45˚ angle
Y-Peg
A
A
45˚