Dion F63 Installation Instructions Manual page 8

Instructions d'installation / Installation instructions : F6313T955
Ensemble Adaptateur F63 / Adapter Kit F63: K27760 for Claas

Tighten the carriage bolt 3/8" x 1-1/4" (15) on the
long lever arm (12) with a lock washer (16) and the
hexagonal nut (17). Use a centre position in the
adjustment slot for now.

Fit the long lever (12) to the short one (1) using a
3/8" flat washer (13) and the cotter pin (14).

Fasten to the handle (21) using a plastic lock nut
(20). Adjust to allow the handle to pivot freely.
Step5: Drive module Installation
Using a winch, lift the drive module (22) and install on the frame using four 1/2" x 1-1/2" bolts
24).

Insert the spacers (23) and fasten with 1/2" x 5" bolts (26).

Reinstall the header chain binder (25) following the instructions in the operator's
manual. Setting proper chain tension is critical to prevent excessive or premature
chain wear.
14 avril 2014
TM
harvesters
8