Advertisement
Mounting on Pole
1.
Fasten the
assembled Mount to
a maximum 4.5" OD
mounting pipe using
pole mounts as
shown. Position so
that face of mounting
plate is parallel to
desired beam path.
Pivot Pin
Align center hole of
2.
antenna with pivot
pin, and elevation
slot with elevation
pin. Push antenna
towards mount and
engage pins. Hold in
place.
Elevation Pin
Pole Mount
FP103230-1 REV.K
IMPORTANT: Do
not loosen the 4
bolts securing the
upper and lower
mounting brackets
Center Hole
Elevation Slot
Antenna
Page 8 of 12
Advertisement
