Advertisement
Assembly of the Mount Kit:
Assemble the upper and lower pole
1.
mounts. Add the Azimuth Adjust Bolt to the
lower pole mount.
Attach the upper pole mount to top of
2.
antenna mounting plate using hardware
supplied with plate.
Align pin in plate
with hole on mount
Confirm that the Mount
is centered as shown.
Tighten bolts Securely
Top of mounting plate
indicated by Elevation
Adjustment Nut
Notes:
Right hand offset is shown, for Left hand offset rotate mounting plate 180º.
(See step 3 for photo).
Adjustments to the antenna may be necessary for Left hand offset mounting,
refer to additional instructions for your antenna model.
FP103230-1 REV.K
Page 4 of 12
Advertisement
