Advertisement
A
zimuth Adjustment:
Loosen the 4 Azimuth Lock Bolts so mounting plate can move.
1.
Caution: Failure to loosen bolts before adjusting will result in damage
Adjust mounting plate using eyebolt adjustment nuts to drive antenna to
2.
required location. Monitor RCL (Receive Carrier Level) and adjust per
radio manufacturer's instructions. Verify antenna is adjusted on main
beam by passing through main beam and out to left and right 1
sidelobe. Return antenna to main beam RCL.
Securely tighten the 4 Azimuth Lock Bolts.
3.
Securely tighten eyebolt adjustment nuts.
4.
Re-check Elevation and adjust if necessary
5.
Elevation
Adjustment Nut
Eyebolt Azimuth
Adjustment Nuts
FP103230-1 REV.K
to mount
st
Azimuth
Lock Bolts
Azimuth
Lock Bolts
Page 10 of 12
Advertisement
