Related Manuals for RadioWaves SP1 Series
Summary of Contents for RadioWaves SP1 Series
- Page 1 Additional Instructions SP1 Series Antennas 495R Billerica Ave. – North Billerica, MA 01862 USA Tel (978)459-8800 fax (978)459-3310 / 8814 Email: sales@radiowaves.com www.radiowaves.com ...
- Page 2 IMPORTANT! Please read instructions through completely before beginning installation. Caution should be used. Qualified persons experienced with antenna assembly and installation are required for installation. DISCLAIMER Radio Waves Inc. disclaims any responsibility or liability for damage or injury resulting from incorrect or unsafe installation practices. ...
-
Page 3: Mounting Options
1) In addition to the items listed in Pole Mount Installation Guide AP103230-1, you will receive a “diamond” mount adapter plate attached to a flat adapter plate with your SP1 series antenna. These plates are shipped in the same box as the antenna, and packed with the pole mount. - Page 4 SAFETY INFORMATION This Information May Save You From Death or Injury Do not attempt to install or dismantle any Radio Waves Inc. products until you have read and understood the information and instructions in this document. Installations: Only trained professional installers should be used to install or dismantle antennas, mounts, and related hardware.It is the responsibility of the installer to be sure that all building and safety codes are met and that the installation is complete...
- Page 5 FP104780-SP1_revD.docx Page 5 of 5 ...