Page 1
Additional Instructions For HP2 Series Antennas 495R Billerica Ave. – North Billerica, MA 01862 USA Tel (978)459-8800 fax (978)459-3310 / 8814 Email: sales@radiowaves.com www.radiowaves.com ...
Page 2
IMPORTANT! Please read instructions through completely before beginning installation. Caution should be used. Qualified persons experienced with antenna assembly and installation are required for installation. DISCLAIMER Radio Waves Inc. disclaims any responsibility or liability for damage or injury resulting from incorrect or unsafe installation practices.
1) In addition to the items listed in Pole Mount Installation Guide AP103230-1, you will receive a “diamond” mount adapter plate with your HP2 series antenna. This plate is shipped in the same box as the antenna, and packed with the pole mount.
SAFETY INFORMATION This Information May Save You From Death or Injury Do not attempt to install or dismantle any Radio Waves Inc. products until you have read and understood the information and instructions in this document. Installations: Only trained professional installers should be used to install or dismantle antennas, mounts, and related hardware.