Advertisement
- Place the A23 m n fix screw nto the pre-dr lled holes of the part 1.
5
- Place the A02 m n fix head nto the assembled part 8, 6, 5, 3 and 7. NOTE that the
Step
m n fix head arrow should be placed n the d rect on of upper wood hole.
- Attach the part 1 to the body we assembled n the prev ous steps and screw the A02
m n fix heads to + or clockw se d rect on unt l ts locked. Do not go any further.
Place the back panel (part 10) as shown below and tap the na l (A28) w th a hammer to dr ve
6
Step
t nto the wood. Keep dr v ng the na l unt l ts head s e ther flush w th or below the surface
of the wood. Use all the na ls g ven n the hardware pack for best result.
1
6x
1
10
Advertisement
