Advertisement
- Attach A24 h nge mount ng plate to the pre-dr lled trace holes of the part 8
3
Step
us ng A19 screws.
- Attach A21 concealed h nge base to the pre-dr lled hole of the part 9
us ng A19 screws.
- Put the parts 8, 6, 5, 3, 7 and part 2 together us ng A17 screws as shown below.
4
Step
- NOTE that the holes of part 8, 6, 5, 3 and 7 are not n the same d stance. Part 8, 5, 3 and 7
holes are located 1.5 nches from the front and 2.3 nches from the back s de of the p ece.
Part 6 holes are located 1.9 nches from the front and 2.3 nches from the back s de of the
p ece.
8
6
A24
8
6
8
5
3
7
A21
9
3
5
7
The holes are not countersunk.
Push the screw A17 through the
hole unt l ts head s ts flush w th
the wood surface. The screw
head should not protrude above
the surface
Advertisement
