Jump-Starting Procedures - RAM Commercial RAM PROMASTER Quick Reference Manual

J U M P S T A R T I N G
Jump Starting Procedures
The vehicle's jump starting remote posts are
located under the hood, in the engine compart-
ment on the driver's side.
NOTE:
If access to the battery is needed, an access
panel on the driver's side floor will allow for
battery access.
Remote Battery Posts
(+) — Remote Positive (+) Post
(-) — Remote Negative (-) Post
Connecting The Jumper Cables
1. Connect the positive (+) end of the jumper
cable to the remote positive (+) post of the
discharged vehicle.
NOTE:
The remote positive (+) post is located in the
engine compartment on the driver's side un-
der the cover of the Front Power Distribution
Center.
2. Connect the opposite end of the positive (+)
jumper cable to the positive (+) post of the
booster battery.
3. Connect the negative end (-) of the jumper
cable to the negative (-) post of the booster
battery.
4. Connect the opposite end of the negative (-)
jumper cable to the remote negative (-) post
of the discharged vehicle.