Preset Function; Automatic Menu - Silvercrest SMWC 700 A1 Operating Instructions Manual

Preset function

The appliance has a preset function . You can use this function to set a time at
which the appliance should start a preset cooking process .
♦ Select a programme as described in the previous sections .
♦ However, before pressing the dial 9 to start cooking, press the preset/child
lock button 0
♦ The display 5 shows 1:00 and the
dial 9 .
♦ Confirm your selection by pressing the dial 9 . The display 5 shows the
current time .
To view the preset time, press the preset/child lock button 0
The display 5 shows the preset time for about four seconds .
Press the stop button q
NOTE
► To change the preset values, you need to first delete the old values and
then enter new ones .
► All other functions are deactivated, as long as the preset function is active .

Automatic menu

It is not necessary to set the duration of the cooking process and the power level
for foods that are prepared in the automatic menu mode . You only need to enter
the type of food you wish to cook and its weight .
NOTE
► The automatic programmes are designed for fresh foods . Frozen foods will
not be adequately cooked with the times programmed into the microwave .
If required, defrost frozen foods using the defrost programme beforehand
(see section "Defrosting") .
■ 20 │ GB │ IE │ NI
.
symbol . Set the desired time using the
to delete the preset values .
.
SMWC 700 A1