Version Menu Display; Bluetooth Menu Display - Dakota Digital ECD-200BT Manual

Version menu display: - LED: 
• This will display the current software code of eth ECD-200BT
• Tap the switch until  is displayed and hold until "" is displayed
• The display will show the first half of the software code, pressing and releasing the button wil
show the second half of the code
• Example =  then 
• Pressing and holding the switch will exit to the main menu
o Tappng the switch will generate a LED test pattern
o Press and hold the switch to save until "" and exit to the main menu
Bluetooth menu display: - LED: 
Two options are available for the Dakota Digital Accessory app: accessing the Bluetooth setup all the
time or only when the ECD-200BT has manually entered setup. "" indicates the Bluetooth
connectivity will be active anytime the key is on, allowing speedometer adjustments to be made while
driving, while "" allows changes when the ECD unit is in setup mode only.
• Press and release the switch until  is displayed and hold until "" is displayed
• Bluetooth ID will display for the app. Example "" - tap switch - "". Hold to continue
• Tap the switch to select between the following options
o  = Bluetooth is available all the time. App changes can be made in real time driving.
o  = Bluetooth setup option are only available to the app when the ECD-200BT has
been placed in setup mode with the function switch.
• Press and hold to save either option.
• The app has a "Safe Mode" that basically sets the Bluetooth to setup mode only.
• To clear Safe Mode, enter the Bluetooth menu, select , then press and hold until "" to
save.
7
MAN# 650704B