Advertisement
SCION
Procedure
Fig. 3-2
Fig. 3-3
Fig. 3-4
Fig. 3-5
Issue: A
04/15/04
tC
2005 -
Page 3 of 17 pages
VSE SUBWOOFER (BAZOOKA
(d) Proceed to remove and secure the rear foam
passenger side storage compartment.
(1) Remove the two (2) plastic plugs and pull
the block straight up. (Fig. 3-2)
(e) Proceed to remove and secure the rear bench
seat, by pulling upwards on each corner, to
release the two (2) mounting clips. (Fig. 3-3)
(f) Using the 2 release handles, lower the driver
and passenger side rear seat backs.
(g) Using the NRT, release the plastic bolt covers
from the two (2) D-Ring holders. (Fig. 3-4)
(1) Using the 10mm socket, remove the two
(2) 10mm D-Rings.
(h) From the center of the rear seat trim cover,
unsnap and remove panel. (Fig. 3-5)
®
)
Advertisement
