Tear-Offs; Ventilation Systems - SCHUBERTH SP1 CARBON Manual

8. TEAR-OFFS

The visor of the SP1 CARBON is suitable for fitting
with tear-off visors. Before to fit the tear-off, check
that the tear-off button is in the position shown on
the figure:
Fitting
1. Pull the tear-off over the tear-off button so that the
lenses are situated in the fixing rips of the
tear-off-button.
2. Rotating the tear-off button tensions the lenses,
which now lie flat against the visor.

9. VENTILATION SYSTEMS

Ventilation 1 - Multi chin ventilation
The SP1 CARBON is provided with four air inlets
to provide ventilation to the visor and chin areas.
The lower air inlets draw fresh air directly towards
the mouth. Air entering the upper inlets is guided
directly to the inside of the visor.
Diverting channels ensure that the airstream
ventilate the vision even at low speeds.
15