Siriusxm Tuner (U.s. Models Only) - Sony MEX-DV1700U Operating Instructions Manual

Adjusting the volume level
Be sure to adjust the volume of each
connected device before playback.
1
Turn down the volume on the unit.
Press  repeatedly until "AUX"
2
appears on the main unit.
If two auxiliary devices are connected, select
the device to adjust its volume by pressing

.
3
Start playback of the auxiliary device at a
moderate volume.
4
Set your usual listening volume on the unit.
Press .
5
Press / to select "AUX-LEVEL," then
6
press .
Press / to adjust the input level.
7
The input level is adjustable in single steps,
between –8 and +18.
Press .
8
The setting is complete.
To hide the system setup display, press
.
With the main unit
Press  instead of , press
and hold the control dial instead of pressing
, rotate the control dial
instead of pressing /, press the control dial
instead of .
SiriusXM tuner
(U.S. models only)
By connecting an optional SiriusXM tuner,
you can use the features and functions of
the SiriusXM satellite radio (Sirius and XM
subscriptions sold separately). For more
details on the services, visit the following
web site:
http://www.siriusxm.com/
Selecting channels
1
During playback, press
enter the browse mode.
(BROWSE) to
2
Rotate the control dial to select the desired
channel, then press it.
Selecting categories
During playback, press  on the
1
main unit to enter browse mode.
2
Rotate the control dial to select the desired
category, then press it.
Parental control
The channels containing unsuitable
contents for children are preset to block. To
unblock the channel, enter the passcode.
1
On the system set up menu (page 48), rotate
the control dial to select "PARENTAL,"
then press it.
2
Rotate the control dial to select "LOCK
SEL," then press it.
3
Rotate the control dial to select "OFF," then
press it.
4
On the passcode input display, enter the
four-digit passcode, then press the control
dial.
The initial passcode is "0000."
To change the passcode
1
On the system set up menu (page 48), rotate
the control dial to select "PARENTAL,"
then press it.
2
Rotate the control dial to select "CODE
EDIT," then press it.
3
On the current passcode input display, enter
the current passcode, then press the control
dial.
The initial passcode is "0000."
4
On the new passcode input display, enter
new 4-digit passcode, then press the control
dial.
Displaying the SiriusXM Radio ID
1
During playback, press
enter the browse mode.
2
Rotate the control dial to select the channel
"0," then press it.
(BROWSE) to
51