Playing an iPod
In this manual, "iPod" is used as a general reference for the iPod functions on the iPod and
iPhone, unless otherwise specified by the text or illustrations.
SOURCE / OFF
MODE
1
Connect the iPod to the USB connector.
Use of the optional USB connection cable RC-
202IPV is recommended.*
The following display appears on the iPod screen*
then playback starts from the item last played.
If an iPod is already connected, to start playback,
press repeatedly until "USB"
appears. ("IPD" appears when iPod is recognized.)
*1 To play videos of iPod with video, use of the RC-202IPV is required.
*2 May not appear in the case of an iPod touch or iPhone being
connected, or that iPod was last played back using passenger
control.
Press repeatedly until the desired play mode appears.
2
The mode changes as follows:
RESUMING*
PODCAST*
2
*1 Appears only when the iPod currently playing is connected.
*2 May not appear depending on the iPod setting.
3
Adjust the volume by rotating the control dial.
With the card remote commander
Use instead of , +/– instead of the control dial.
To stop playback
Press for 1 second.
With the card remote commander, press .
Control dial
1
ALBUM TRACK GENRE PLAYLIST ARTIST
1
OFF
M/m
,
2
ENTER
SRC
MODE
VOL
19