Table of Contents
Advertisement
Quick Links
Savant Panelized Lighting
Deployment Guide
Document Number:
009-1823-01
Document Date:
Nov 2019
Document Supports:
da Vinci 9.0
This document guides the installer through the process of deployment, setup and configuration for the Savant Panelized Lighting system and supports the
following products:
–
Panel Bridge Controller (PBC-1000-xx)
–
QO and Homeline style Dual 500W Adaptive Phase Companion Module Dimmer (SPM-Q2APD10, SPM-H2APD10)
–
QO and Homeline style Dual 300W Forward Phase Companion Module Dimmer (SPM-Q2FPD10, SPM-H2FPD10)
–
QO and Homeline style Dual 20 Amp Relay Companion Module (RPM-Q2R20120, RPM-H2R20120)
–
QO and Homeline style 240V AC (2-pole) Relay Companion Module (RPM-Q2R40240, RPM-H140240)
Copyright © 2019 Savant System, LLC
45 Perseverance Way, Hyannis, MA 02601
Savant.com
| 508.683.2500
Advertisement
Table of Contents
Related Manuals for Savant Pro System
Summary of Contents for Savant Pro System
- Page 1 009-1823-01 Document Date: Nov 2019 Document Supports: da Vinci 9.0 This document guides the installer through the process of deployment, setup and configuration for the Savant Panelized Lighting system and supports the following products: – Panel Bridge Controller (PBC-1000-xx) –...
-
Page 2: Table Of Contents
Appendix A: OLA Server - Additional Information ................................23 Appendix B: Network Requirements ......................................26 Appendix C: Companion Module LED Screen Icons ................................27 Appendix D: Energy Monitoring ........................................28 Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114... - Page 3 Important Safety Information - Read First Safety Statements Before installing, configuring, or operating any equipment, Savant recom- All safety instructions below should be read, understood, and applied under all mends that each dealer, integrator, installer, etc. access and read all the rele- relevant circumstances when working with this equipment.
-
Page 4: Introduction
1. Introduction This document will guide the installer/integrator through the process of installing, configuring, and adding the following devices to a Savant Pro System. – Panel Bridge Controller (PBC-1000-10) – QO and Homeline style Dual 500W Adaptive Phase Companion Module Dimmer (SPM-Q2APD10, SPM-H2APD10) –... -
Page 5: Overview
3. Overview The diagram below displays one example of a complete Savant Panelized Lighting system. Refer to the bulleted items below for additional information. lighting trough The number of panels required Supported Panels: should be determined by - Homeline 1.0 inch load centers the electrical contractor. -
Page 6: Connections
Do not add MLV (Magnetic Low Voltage) and ELV (Electronic Low Voltage) type loads to the same breaker/Companion Module circuit. MLV and ELV type loads should be connected to separate breaker circuits. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114... - Page 7 The total current draw for all loads on a circuit shouldn’t exceed 80% of the maximum supported by the circuits breaker. For example, with a 15 amp breaker max would be 12 amps or 1440 watts. With a 20 amp breaker, max would be 16 amps or 1920 watts. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114...
- Page 8 The outputs of the relay module switch between 0 and 120V AC. These outputs do not support dimming. – The Primary and Auxiliary antennas must be separated by 25 cm (9.84 inch). Use the supplied RP-SMA male to female cable to separate. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114...
-
Page 9: Blueprint - Preliminary Setup
Blueprint was made. Select the Generate Services icon on the Blueprint toolbar. This will change the State Icon to either Blue or Green and make the Lighting/Keypad Manager active. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114... -
Page 10: Blueprint - Add Controller To The Configuration
With the Panel Bridge Controller connected, power applied, and the Lighting/Keypad Manager active, the steps in this section describe how to add the Panel Bridge Controller to a Blueprint configuration. Select Tools > Savant Lighting and Keypads from the Blueprint menu Lighting/Keypad Manager for Smith Home bar to open the Lighting/Keypad Manager. -
Page 11: Ola Server
Expand the Universes field (Select the icon) Instance Name OLA Server Version 0.10.7 Select the Universe labeled Savant Lighting. The Savant Started Mon Mar 25 17:55:30 2019 Lighting Universe supports all Savant lighting controllers. Reload Plugins Stop OLA Select the Settings tab. - Page 12 Manufacturers Label Reset Device LEARN MORE The remaining fields are largely informational and are not required for basic setup or functionality of the Savant Panelized Lighting system. The descriptions below simply detail each of the fields and their purpose. –...
- Page 13 PBC Controller. HELPFUL! For further information on the Companion CHAN A Module LCD display and its associated indicators and functions, refer to Appendix CHAN B POWER Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114...
- Page 14 Not all fields in the OLA Server need to be set. Because of this, only the required fields are described above. For information on the additional fields as well as other basic OLA Server information, see Appendix A: OLA Server - Additional Information below. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114...
- Page 15 Free slots: first 3, last: 512, max contiguous: 500 4. Close the OLA Server once the Universe is configured. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114...
-
Page 16: Blueprint - Discover Lighting Loads And Test
Select the Start Scan button to begin querying/scanning the previously configured OLA information about the companion module loads. After a few seconds, the loads will populate in the Savant Smart Groups section. Each load will populate in the Savant Smart Groups frame as a Smart Group. Select the disclosure arrow to expand each smart group 4. -
Page 17: Blueprint - Smart Groups
9. Blueprint - Smart Groups A Smart Group is a group that contains one or more companion module loads. The Smart Group can be considered the equivalent to a base load for Savant lighting devices. Savant Lighting scenes contain both base loads and smart groups. During the scan process in the previous section, each companion module lighting load is automatically added to a smart group. -
Page 18: Blueprint - Update Data Table
Once all configuration within the Lighting and Keypad Manager is complete, the Lighting Data Table must be updated to sync the changes made. The data tables are used to populate the Savant user interfaces for controlling lighting. Savant Smart Groups... -
Page 19: Blueprint - Upload Configuration
With the configuration complete, it can now saved and uploaded to the Savant System Host. IMPORTANT! When connected to the OLA Server, all control to the Savant System is lost. Close the OLA Server window before uploading a configura- tion to the Host. -
Page 20: Savant Pro App
Load Flicker Flickering of a load can typically be fixed by changing the point at which the load is turned on. Savant supplies both a forward phase and adaptive phase type dimmer companion module. Forward phase dimmers turn-on on the leading edge of an AC sine wave. The load connected to a forward phase dimmer should support forward phase. -
Page 21: Firmware Upgrade
14.2. Download the Companion Module Firmware Package. The latest available firmware updates for all companion modules is available on the Savant Store. Follow the steps below to download the firmware and save it to a directory on a mobile device. - Page 22 Step 3: Package Selection Step 4: Ready to Upload COMP0A3149 COMP0A3149 Browse Recents Scanner RSSI Graph Advertiser Settings Scanner RSSI Graph Advertiser Settings Scanner RSSI Graph Advertiser Settings Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114...
-
Page 23: Appendix A: Ola Server - Additional Information
Appendix A: OLA Server - Additional Information SETTINGS TAB The section below details the fields and options available within the Settings tab of the Savant Lighting Universe. – Universe Id - The Savant Lighting Universe ID is automatically populated with address = 1 and should not be changed. - Page 24 RDM TAB (Lighting Loads) The section below details the fields and options available within the RDM tab of the Savant Lighting Universe for dimming and relay modules. DMX Personality - Set for the dimming phase type for lighting load installed (forward or reverse phase).
- Page 25 Sensor 3-5 - Displays the same information as sensors 0-2 above but data is taken from output B on the companion module. DMX Monitor/DMX Console Tabs The DMX Monitor and DMX Console tabs are not applicable with the PBC Controller. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114...
-
Page 26: Appendix B: Network Requirements
Managing IP Addresses To ensure that the IP address will not change due to a power outage, a static IP address or DHCP reservation should be configured. Savant recommends using DHCP reservation within the router. By using this method, static IP addresses for all devices can be managed from a single UI, avoiding the need to access devices individually. -
Page 27: Appendix C: Companion Module Led Screen Icons
Enter a check-mark to enable the Identify Device function and select Save. At this point, the IDENTIFY screen will appear on the module and a light bulb icon will blink. If there is a load connected to the module, that load will also blink. Savant Panelized Lighting Deployment Guide Copyright © 2019 Savant Systems, LLC 009-1823-01 | 191114... -
Page 28: Appendix D: Energy Monitoring
Appendix D: Energy Monitoring The Panel Bridge Controller can monitor the energy used by each of the loads it is controlling and send that information to the Savant Pro App. The section below describes how to enable/disable energy monitoring. Open the Lighting and Keypad Manager, select the Keypads and Controllers tab, and highlight the PBC. - Page 29 Savant Systems, LLC. shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material.
Need help?
Do you have a question about the Pro System and is the answer not in the manual?
Questions and answers