Advertisement
WALKIN' WHEELS MINI FRONT WHEEL ATTACHMENT
The Walkin' Wheels Front Wheel Attachment gives mobility to dogs with front leg weakness or weakness in all four
legs. It is ideal for helping disabled pets get exercise and for rehabilitation while they are healing. Like the rest of
the Walkin' Wheels products, the Front Wheel Attachment is adjustable, so it will fit the Walkin' Wheels wheelchair
for any size dog from 2 to 10 pounds and can easily be removed at any time.
Note: Your dog's fold of flank rear leg measurement determined the Front Wheel Attachment size you received.
The Front Wheel Attachment is easy to assemble. You won't need any tools.
Front
leg rings
1
THE PROVEN LEADER IN PET MOBILITY
ASSEMBLY INSTRUCTIONS for the B1
What's in the B1 Front Box:
Knuckle
Caster
wheels
Adjustment
knobs
Clamps for
leg rings (4)
Advertisement
Table of Contents
Related Manuals for Walkin’ Pets B1
Summary of Contents for Walkin’ Pets B1
- Page 1 2 to 10 pounds and can easily be removed at any time. Note: Your dog’s fold of flank rear leg measurement determined the Front Wheel Attachment size you received. The Front Wheel Attachment is easy to assemble. You won’t need any tools. What's in the B1 Front Box: Adjustment knobs...
- Page 2 If purchasing a Quad Mini Wheelchair, start with instructions in rear box first Preparing Your Rear Mini Wheels for Front Attachment (This must be done secondly) 1. Remove the rear clamps, leg rings, and front harness from the rear wheelchair. 2.
- Page 3 Installing the FRONT Wheels to the Frame (continued) 1. Remove the adjustment knob and washer on the front knuckle, holding the bonded knuckle together in one piece, remove bolt. Attach knuckle to the side extender open slot approximately 2” from the front end. Keeping the bonded knuckle in one piece, which will insure the correct angle for caster mount and wheel.
Need help?
Do you have a question about the B1 and is the answer not in the manual?
Questions and answers