Advertisement
Step 5
Close tent zip
starting top right as shown.
Step 6
Close tent zip top to bottom as shown.
Fit equipment hanger ends to poles.
Position equipment hangers as required.
Equipment
Hanger End
Assembly Instructions
Two Person Assembly
Mammoth
Classic 240L
Assembly Guide
Equipment Hangers
Lower Equipment Hanger
Parts List
Yellow Pole
Greem Pole
Blue Pole
x10
x7
x6
4-Way
Join
x4
Upper Equipment Hanger
3-Way
Black Pole
Corner
x6
x8
Equipment
Hanger Ends
x8
Advertisement
Table of Contents
Related Manuals for Mammoth Tents Classic+ 240L
Summary of Contents for Mammoth Tents Classic+ 240L
- Page 1 Assembly Instructions Step 5 Two Person Assembly Close tent zip starting top right as shown. Mammoth Classic 240L Assembly Guide Equipment Hangers Upper Equipment Hanger Lower Equipment Hanger Step 6 Parts List Close tent zip top to bottom as shown. Fit equipment hanger ends to poles.
- Page 2 Step 1 Step 3 Insert ceiling poles into top 3-way corners Organise poles and connectors into their colours and groups. and 4-Way joins. Unzip and lay out tent. Locate floor section and lay flat with edge sections vertical. 3-Way Corner Assemble floor poles and 3-way corners and 4-way Join as shown.
Need help?
Do you have a question about the Classic+ 240L and is the answer not in the manual?
Questions and answers