Advertisement
Step 5
Close tent zip
starting top right as shown.
Step 6
Close tent zip top to bottom as shown.
Fit equipment hanger ends to poles.
Position equipment hangers as required.
Equipment
Hanger End
Assembly Instructions
Two Person Assembly
Mammoth
Pro 240LHC, 300LHC
Assembly Guide
Equipment Hangers
Lower Equipment Hanger
Parts List
Yellow Pole
Blue Pole
Black Pole
x17
x6
x6
Upper Equipment Hanger
Equipment
3-Way
4-Way
Join
Hanger Ends
Corner
x8
x4
x8
Advertisement
Table of Contents
Related Manuals for Mammoth Tents Pro+ 240LHC
Summary of Contents for Mammoth Tents Pro+ 240LHC
- Page 1 Assembly Instructions Step 5 Two Person Assembly Close tent zip starting top right as shown. Mammoth Pro 240LHC, 300LHC Assembly Guide Equipment Hangers Upper Equipment Hanger Lower Equipment Hanger Step 6 Parts List Close tent zip top to bottom as shown. Fit equipment hanger ends to poles.
- Page 2 Step 1 Step 3 Insert ceiling poles into top 3-way corners Organise poles and connectors into their colours and groups. and 4-Way joins. Unzip and lay out tent. Locate floor section and lay flat with edge sections vertical. 3-Way Corner Assemble floor poles and 3-way corners and 4-way Join as shown.
Need help?
Do you have a question about the Pro+ 240LHC and is the answer not in the manual?
Questions and answers