Britax Regent User Manual page 20

Care and Maintenance
Buckle Removal
1 Locate the metal buckle strap
retainer on the bottom of the child
seat.
2 Pull retainer away from child seat
to loosen.
3 Turn the retainer so that the short
side will go through the slot in the child seat shell (Fig. A).
4 Push the retainer through slots in the shell and cover, to the
front of the child seat.
Rethreading the Buckle
1 Locate the necessary buckle slot.
2 Turn the buckle retainer so that the short side will fit through
the slot in the cover and child seat shell (Fig. A).
3 Push the retainer through the slots in the cover and shell to the
bottom of the child seat.
4 Pull buckle away from the child seat until tight, then verify that
the strap is not twisted and the release button is facing out.
5 Verify that the buckle retainer lies flat against the the child seat
shell.
36
A
Cleaning the Buckle
If your child eats and drinks while in the child
seat, you may need to check the buckle
periodically and wash out any accumulated
debris or dried liquids.
THOROUGHLY RINSE, using warm
water (Fig. B).
SOAK, overnight if possible, using warm
water to loosen hardened drinks or food.
TEST THE BUCKLE, by fastening
unfastening until a positive click is
heard after inserting the second buckle
tongue (Fig. C). If click is not heard,
repeat cleaning procedure.
TOWEL DRY
DO NOT:
Lubricate
Use solvents
Use soap or household detergents
Care and Maintenance
B
and
C
37