Siemens SICAM P27 Manual page 30

Operation and Display
4.3 Key Definition
1
NO.
Symbol
5
Note
Password level (1 bit, 0 to 2) and password (6 bits) should be entered at first for key setting. Password level
and permission:
• L0 password-all parameters above are configurable;
• L1 password-all parameters above are configurable;
• L2 password-all parameters except for meter reset, clearing extreme value and PT/CT ratio are
configurable. All default password is 000000.
Note
The meter should be reset after altering conversion ratio to ensure reasonable correspondence between
communication reading and displayed metering data.
30
st
level menu
Definition Symbol
Display
setting
nd
2 level menu
Definition
Time of returning to
cyclic display state
when no operation
Time of backlight
on when no opera-
tion (normally on
when set to 0)
Interval of cyclic
display
SICAM P27, 3-phase Harmonic Power Meter, User Manual
E50417-H8940-C560- , Release Date
Range Remarks
Unit: min.
1 ... 99
Default setting: 10
Unit: min.
0 ... 99
Default setting: 10
Unit: sec
1 ... 99
Default setting: 5