Siemens SICAM P27 Manual page 27

SICAM P27, 3-phase Harmonic Power Meter, User Manual
E50417-H8940-C560- , Release Date
Example 19:
This screen shows current Phase B overall active energy.
At cyclic display mode, press "▲" or "▼" to enter key display
mode, press " " to switch to area B, and press "▲" or "▼"
to switch to current Phase B overall active energy.
Example 20:
This screen shows display items of software version.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. Press " " to switch to area B. Press "▲" or "▼"
again to switch to display items of software version.
In the figure, "Soft" means software version, "13" means
product specification, "121121" means software version date
and "00" means serial number of software production.
Example 21:
This screen shows active pulse constant items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode, press " " to switch to area B, and press "▲" or "▼"
to switch to active pulse constant items.
In the figure, active constant=5,000 imp/kWh.
Example 22:
This screen shows reactive pulse constant items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode, press " " to switch to area B, and press "▲" or "▼"
to switch to reactive pulse constant items.
In the figure, reactive constant=5,000 imp/kWh.
Operation and Display
4.3 Key Definition
27