Siemens SICAM P27 Manual page 23

• Data items combined in area A and B:
Firmware version, Device ID, active constant and reactive constant.
Note
Full screen, firmware version is displayed in order when the meter is power on.
Examples for Flip-With-Key Operation
SICAM P27, 3-phase Harmonic Power Meter, User Manual
E50417-H8940-C560- , Release Date
Example 1:
This screen shows voltage items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" again to
switch to voltage items.
In the figure, L1=220.0 V, L2=220.1 V, L3=220.5 V and 3-
phase average voltage=220.2 V.
"RS1" shows there is one RS485 port and flickering symbol
means communication in progress. "
runs in first quartile.
Example 2:
This screen shows maximum value display items of current
line voltage.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" again to
switch to voltage items and press "
value display.
In the figure: L1=380.0 V, L2=380.1 V, L3=380.5 V, and
maximum 3-phase average line voltage=380.2 V. You can
press "▲" or "▼" to switch to minimum line voltage display.
Press " " to return to previous display.
Example 3:
This screen shows current items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to switch to
phase current display.
In the figure, L1=1.000 A, L2=1.001 A, L3=1.002 A and 3-
phase average current=1.001 A.
Operation and Display
4.3 Key Definition
" means the meter
" to enter maximum
23