Getting Started; Figure 2 Steps 1 To 3 To Get Started With The Distance2Gol Demo Board - Infineon BGT24LTR11 Manual

Distance2GoL (Software-Controlled FMCW) low-power radar shield using
BGT24LTR11 for range detection and human tracking

Getting started

2 Getting started
This section provides a quick step-by-step process to get started with the Distance2GoL board. Some of the
steps are optional, for going deeper into the analysis of the board, the firmware and the extracted signals.
STEP 1
Box contents
• BGT24LTR11 Shield
(Software-
Controlled FMCW)
• Radar Baseboard
XMC4700
Figure 2 Steps 1 to 3 to get started with the Distance2GoL demo board
Application Note
STEP 2
Infineon Toolbox
• Go to: Infineon Products and
Tools - Infineon Toolbox
• Click on "Infineon Toolbox
Launcher" link.
• Scroll down and click on the
"Download now" button.
• Run the "infineon-toolbox-
setup.exe" file.
• "Accept" the
license agreement.
• Finish installation. Create a
desktop shortcut.
page 8 of 32
STEP 3
Install Distance2GoL kit
• Open "
Infineon Toolbox
• Click on the "
Manage tools
• Search for "
Distance2GoL Kit
• Click on "Install".
• "Accept" the license agreement.
• Finish installation.
".
" tab.
".
V1.0
2021-03-31