Additional Materials; Figure 4 Steps 7 To 9 To Get Started With The Distance2Gol Demo Board - Infineon BGT24LTR11 Manual

Distance2GoL (Software-Controlled FMCW) low-power radar shield using
BGT24LTR11 for range detection and human tracking
Getting started
STEP 7
View and edit source code
• Download and install the
DAVE™ IDE tool:
https://infineoncommun
ity.com/dave-
download_ID645
• Go to
Firmware_Software 
. Unzip the
DAVE project
DAVE™ project files of your
choice.
• Run DAVE™ IDE.
• Import DAVE™ projects and
debug.
Figure 4 Steps 7 to 9 to get started with the Distance2GoL demo board
2.1

Additional materials

The board comes with an additional downloadable package for customer support. This can be downloaded
through Step 4 in Figure 3. The package includes:
Application Notes
•
Software User Manual
•
Altium PCB project
•
Schematics
•
Bill of Materials (BOM)
•
Production data
•
DAVE™ project and FW binary files
•
Radar GUI XML settings files
•
3D model files
•
Power consumption calculator
•
Application Note
Optional
Radar GUI
• Disconnect micro-USB cable
from "Debug" port and
connect it to "Default" port.
• Open Radar GUI.
• Real-time data is now on
your screen.
page 10 of 32
STEP 8 ST EP 9
MATLAB interface
• Go to:
Firmware_Software 
Communication Library 
ComLib_Matlab_Interface 
Examples  GettingStarted
Copy the path.
• Open MATLAB. Paste the path
in the top tab.
"
extract_raw_data.m
show up on the left tab.
• Connect board as
STEP 8
• Click on " " to see raw data.
Run
Optional
.
" file will
.
V1.0
2021-03-31