WilTec 51701–51703 Operation Manual page 7

№ Name
1 Hexagonal bolt M8×50
2 Hexagonal lock nut M8
3 R pin Ø3
4 Straight hitch bracket
5 Spacer
6 Angled hitch bracket
7 Hitch pin
8. fig. 6: Assemble the height adjustment handle to the height
adjustment tube as shown in the fig. Use two M8×40 hex bolts
and M8 lock nuts. Do not tighten yet.
№ Name
1 Grip
2 Height adjustment handle
3 Hexagonal bolt M8×40
4 Hexagonal lock nut M8
9. fig. 7: Insert a M8×20 hex bolt through the angle bracket.
Assemble onto the bolt (in order) the spacer bushing, the
height adjustment strap, a Ø8 big flat washer and a M8 hex
lock nut. Tighten.
№ Name
1 Hexagonal bolt M8×20
2 Spacer bushing
3 Big flat washer Ø8
4 Hexagonal lock nut M8
5 Height adjustment strap
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№ Name
8 Hexagonal bolt M8×50
9 Hexagonal lock nut M8
10 R pin Ø3
11 Angled hitch bracket
12 Spacer
13 Straight hitch bracket
14 Hitch pin
Item 51701–51703 Page 7
01 2021-1