Switching The Umic Off; Umic And Phone Calls - Unitron uMic Manual

Switching the uMic off

To end the uMic transmission
completely, switch off the uMic by
sliding the power switch to the off
position.
In the off position, the white marking cannot be
seen.
Switch the uMic off when not in use.
If the uMic connection to a streamer was lost
for more than 30 minutes, the uMic will go into
sleep mode to save power. The light indicator
will turn off and a uMic re-start (turn off and on
again) is required to resume the transmission.
16

uMic and phone calls

Phone calls via Bluetooth will always take
priority over the uMic streaming.
If uDirect 2, uDirect 3 or uStream streamer is
paired with your mobile phone, you can still
receive phone calls, even when using uMic.
In case of an incoming call, the streamer
automatically stops transmitting the audio
signal from your uMic and and sends the signal
from your mobile phone to your hearing aids
instead.
17