Table of Contents
Advertisement
Error
Failure
Code
Indicator
The START/
PAUSE light
& PROGRAM
END lights are
blinking.
The PROGRAM
READY light
and PROGRAM
END lights are
blinking.
The START/
PAUSE light,
PROGRAM
READY light
and PROGRAM
END lights are
blinking.
The PROGRAM
READY Light
and PROGRAM
END lights stay
on.
Probable Failure
The Heater in your
machine or the heat
sensor has failed.
The Motor has failed.
The Motor has failed.
Your voltage is too high
or too low.
What Needs Doing
Shut down your machine and
unplug. Turn off your tap and
report it to the nearest
authorized service centre.
Shut down your machine and
unplug. Turn off the tap and
call your nearest authorized
service centre.
Shut down your machine and
unplug it. Turn off the water
tap and call your nearest
authorized service centre.
If the network (local voltage) is
lower than 150V or higher than
260V, your machine will auto-
matically stop. When the
network voltage recovers, your
machine will resume working.
31
Advertisement
Table of Contents
