Starting A Wash Cycle - Baumatic BDW16 Instruction Manual

STARTING A WASH CYCLE

1)
MAKE SURE THAT YOUR DISHWASHER'S PLUG
HAS BEEN PUSHED ALL THE WAY INTO THE WALL
SOCKET.
2)
MAKE SURE THAT THE WATER SUPPLY IS TURNED
ON TO FULL PRESSURE.
3)
LOAD YOUR DISHWASHER (SEE THE SECTION
ENTITLED 'LOADING YOUR DISHWASHER', PAGES
8-11).
4)
POUR IN DETERGENT (SEE THE SECTION
ENTITLED 'SALT, DETERGENT & RINSE AID'),
PAGES 5-7.
**** Note:
When you turn your dishwasher on, the number 'OO' should show on the display. If you see
any other digits, such as '12' or '01', '02', '03', etc., please refer to the trouble-shooting section on page 19.
* REMEMBER *:
ADVANCE BY PRESSING THE DELAY BUTTON MULTIPLE TIMES UNTIL THE
* Note: Each time you press the delay timer key, you will move the start of your wash cycle forward by one hour.
.
Intensive
139
(strong)
.
mins
BAUMATIC BDW16 dishwasher user manual
YOU CAN PROGRAM YOUR DISHWASHER UP TO 24 HOURS IN
DESIRED DELAY HAS BEEN SET.
Approximate Timing of Wash Cycles
Normal Economy
150
.
mins mins
5)
OPEN THE DOOR, PRESS THE 'ON/OFF'
BUTTON AND THE 'ON/OFF' LIGHT WILL
COME ON.
6)
PRESS THE 'P' KEY (PROGRAM KEY) TO
SELECT THE 'WASH CYCLE'. SEE TABLE
ON NEXT PAGE FOR WASH CYCLE TYPES.
7)
CLOSE THE DOOR. THE WASHING WILL
START AFTER APPROXIMATELY TEN
SECONDS.
Rinse
95 76
.
mins
12
P
Delay Timer Key (7)
Glass Rapid
103 28
. .
mins mins
12
Soap
7
. .
mins