Starting A Wash Cycle - Baumatic BFD65W Instruction Manual

STARTING A WASH CYCLE

1. Draw out the lower and upper basket, load the dishes and push them back. It
is recommended to load the lower basket first, then the upper one (see the
section entitled "LOADING THE DISHWASHER").
2. Pour in the detergent (see the section entitled : "USING YOUR
DISHWASHER" )
3. Ensure the door is properly closed. NOTE: A click can be heard when the door
is closed perfectly.
4. Insert the plug into the socket.
The power supply is 220-240VAC 50HZ, the specification of the socket is 12A 250
VAC. Make sure that the water supply is turned on to full pressure.
5. Press the ON/OFF button.
6. Turn the knob located on the right of the control panel in a clockwise direction
and select the desired Program.
7. Press the START/PAUSE button to start the washing.
CHANGE THE PROGRAMME
NOTE: A program can be changed only before the detergent has been released.
Otherwise, you must refill the detergent dispenser.
1. Please press the START button for more than three seconds
2. Turn around the program knob to select the desired program.
3. Press the START button to start washing.
NOTE: If you open the door when washing, the machine will pause. When you close
the door and press the START/PAUSE button, the machine will keep on working
after 10 seconds.
NOTE: If all lights begin to flicker, that indicates the machine is out of order, please
turn off the main power and water supply before calling a service.
12