Installation; Operating Procedure - Nilfisk-Advance SO 4500 User Manual

Hide thumbs Also See for SO 4500:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Installation

Warnings
.........................................................
This machine has been designed with your safety in mind; however it is
important that you observe the following points for safe operation during the
This is an electrical product – Do not use in wet weather or allow the machine to get wet.
Do not discharge steam towards people, danger of scolding. Or towards equipment containing
electrical components
Never allow children to play with this appliance.
Do not use the machine for other purposes that it was built for.
Please remember that the steam cleaner operates at temperatures in excess of 170°C. Never use it
on objects, which cannot resist the temperature (delicate materials, fabrics, plastics, wood etc).
Where any doubt exists check carefully on a part of the material where minor marks will not matter.
Do not operate the machine or carry out any maintenance out on it

Operating Procedure

.........................................................
1. Fill the cold water tank (Number 1 Diagram A) with clean cold water only.
!!
Anything other that clean cold water used in the
Water tank will void the manufacturer's warranty.
2. Connect the Steam Hose (Number 1 Diagram C) to the front of the machine (Number 3 Diagram A)
ensuring it is pushed in all the way and the pin on the flap locks into the hole on the hose.
!! Grease "O" rings on steam pin before connecting.
!! To release the steam hose, lift the flap and pull.
Lift the machine out of the box.
Check all accessories are present in the box as
shown in Diagram C
operating procedure
Unless you are trained and authorised to do so
Unless you have read and thoroughly understand this instruction manual.
English
6

Advertisement

Table of Contents
loading

Table of Contents