How To Charge; Led Indicators; How To Call For Help - Medical Guardian Active Guardian-4G Instructions

Tethering - Lanyard
Tethering - Belt Clip
Sell Points for sleeve:
● 4G LTE over Verizon network
● Fall detection with Cancel
● GPS with Wifi Support
● IPX7
● Battery lasts more than 5 days
● Lightweight wearable with Lanyard and belt clip
● Durable

How to Charge:

Place the unit into the cradle and the unit will state "Charging". Typical charging time is 2-3
hours. The red battery light flashes every 5 seconds while charging and is solid when charged.
● Battery lasts up to 7 days based on usage.

LED Indicators:

● Red battery light at top of call button
The red battery light will flash every 10 seconds when the device needs to be
charged.While charging, the red battery light will flash every 5 seconds until the device is
fully charged.Once fully charged, the red battery light will be solid.call button red light at
top of call button blue light around call button speaker microphone.
Blue call light around call button
During an SOS call, the blue call light will be solid.The blue call light will flash every 5
seconds while charging and when Unit is on and ready for use

How to call for help:

We recommend that you test Active Guardian 4G Weekly.
To Test:
1. Press and hold the call button until the light around the call button on unit turns blue and the
device vibrates.
2.After a short delay, you will hear a voice message and then tones or ringing.
3.The operator will answer the call
4.Tell the operator you are testing.
ESD +/-5kV Contact +/-10kV Air