Medical Guardian Elite 911 Quick Start Manual

Hide thumbs Also See for Elite 911:

QUICK START GUIDE

Elite 911

IMPORTANT:

Before beginning, please place your device on the

included charger. We recommend charging for 2

hours before testing. Check your user manual for

detailed instructions on how to conduct a test.

We recommend that you choose a location that is

centrally located, easy access, and close to an outlet.

Plug the Power Cord Adapter into a wall socket not

controlled by a switch, and the small end into your

Charging Cradle.

The LED on the Charging Cradle will light up solid

green when the cradle is plugged in correctly.

If you have questions,

or need assistance,

we are here to help.

1 (800) 797-1965

M - F 9:00am - 9:00pm (ET)

Sat 9:00am - 5:00pm (ET)

Table of Contents

Do you have a question about the Elite 911 and is the answer not in the manual?

Page 1 We recommend that you choose a location that is centrally located, easy access, and close to an outlet. Charge your Elite 911 Plug the Power Cord Adapter into a wall socket not controlled by a switch, and the small end into your Charging Cradle.
Page 2 Place your Elite 911 into the charging cradle. The device will take a few moments to wake up, and will then say “your device is now charging.” The Network LED will blink green while connecting to the cellular network, and will be solid green once fully connected and ready to test and/or make an emergency call.