Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Medical Guardian MGClassic
Summary of Contents for Medical Guardian MGClassic
- Page 1 MGClassic Feel safe and secure in and around your home...
-
Page 2: What's In The Box
What’s in the box... - Page 3 MGClassic details Reset button The reset button can be pressed and held to turn off the blue light around the emergency call button. 2-way speaker You can clearly hear and speak with an emergency operator using this speaker system. Emergency call button Press this emergency call button or one of your wearables if you’re not near the base station to connect...
-
Page 4: Set Up And Install
Set up and install Choose a location for the base station. We recommend placing the base station close to the main landline telephone wall jack or modem in your home using the provided six (6) foot phone cord. Set-up your base station. Unplug the phone cord from the landline telephone and plug it into the “LINE IN” socket located on the back of the base station. - Page 5 TO PHONE RESET LINE IN TO PHONE PLEASE NOTE: Do not plug the base station power RESET cord into an electrical outlet controlled by a light switch or into a power strip to avoid accidental power loss. PLEASE NOTE: If the malfunction indicator lights up red, please visit medicalguardian.com/support/.
- Page 6 Testing your buttons Before testing your device, check your phone for a dial tone to ensure that the unit is not in any way affecting the normal functioning of your phone. Firmly press your wrist or neck pendant once while standing at least five feet from to your base station. The button’s red light will flash once indicating signal was sent.
- Page 7 RESET HOW CAN I TEST HELP YOU? CONFIRMED! RESET RESET JUST TESTING.
-
Page 8: Device Features
Device features Your wearable button(s) are water-resistant. They are safe to wear in the shower but please avoid the following as they may cause damage: salt water, chlorine, and submerging it under water for more than 30 minutes. If you leave town, you can take your device with you! Once you get to your new location, just visit our online customer portal or call our Customer Care team to update your address and phone number. -
Page 9: Base Station Indicators
Base station indicators Feature Symbol Color Display What it means Power indicator Green The base station is connected to a power supply. Blinking The base station is operating on its backup battery. The base station has no power. Communication Green The base station is ready for call. - Page 10 FAQs How long does the battery in the button (neck and wrist) last? The buttons have a battery life of up to 5 years. A red flashing trouble light on the base device indicates a low battery in the button. If you experience a low battery light indicator, please call our Customer Care department.
-
Page 11: Technical Information
Technical information FCC Part 68 Compliance The required customer information is provided in the Installation and Operation Guide. This equipment, the Classic, complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the rear side of this equipment is a label, that contains among other information, a product identifier in the format US:85IMM00BES6502HCP. -
Page 12: Customer Service
Customer service Have questions about your device? Scan the QR Code below with your phone camera or visit: medicalguardian.com/support/ If you need additional assistance, our Customer Care team can be reached at 1 (800) 313-1191. Monday-Friday, 9AM-8PM EST and Saturday 9AM-5PM EST. CGM010000...
Need help?
Do you have a question about the MGClassic and is the answer not in the manual?
Questions and answers